Huawei Bm625 Blank WAN repair

|


REQUIREMENTS:

BM625 Firmware Upgrader : Click Here (Libya Technology Edition)
BM622 Configuration File
BM622 Default Configuration File

Note: Make Sure you have an active Mac Address in because that would be used for your WiMAX CPE device Bm625. It should be 2Mbps cause on the process of restoring the default setting of Bm625 will be Blank WAN again.

Let's Start!
1. Plugin the BM622 CPE with active/connected mac address.
  • Login to Graphical User Interface (GUI) as admin http://192.168.1.1
  • Go to WiMAX and Security
  • Copy the information in this 3 boxes (NAI,User ID,User Password) and save it to notepad this is important!
  • Download the configuration file and default configuration file how?
  • Login to Web UI as admin http://192.168.1.1
  • Go to Maintain, Device and Configuration tab click download and save.
  • For the Default Config choose Advance tab click download and save.

NOTE: PLEASE DO NOT TURN OFF OR USE THE CPE WHEN UPGRADING IT CAN DAMAGE YOUR FIRMWARE

2. Download the Firmware Upgrader from here upgrade your WMAX Bm625 firmware how?
  • Login to Graphical User Interface (GUI) as admin http://192.168.1.1
  • Go to Maintain, Device and Firmware
  • Choose File and Select the Firmware You downloaded before!
  • Reboot Device
3. After succeeding firmware upgrade input the mac address of the Bm622 then restoredef and upload the Configuration File and Default Config File how?
  • A. Login to Graphical User Interface (GUI) as admin http://192.168.1.1
  • B. Go to Maintain, Device and Configuration tab and for the Default Config choose Advance tab
  • C. Choose File and Select the Config You downloaded before!
  • D. Reboot Device




13 comments:

Anonymous said...

Hindi naman blank wan yan boss...ang blank hindi mo na totally ma access ang 192.1681.1 In that case mac lang problema dyan

Anonymous said...

ang blank wan boss, di ka makaka access ng admin password!

Anonymous said...

e pano kung nkakaconnect sa 192.168.1.1 pero la siya signal sa router at wlang wan address?

Anonymous said...

magulo tong post. hindi comprehensive. saka ang pagkakaalam ko hindi mo mapapasok ang admin ng gui pag blank wan

Anonymous said...

makakapasok pa dn sa admin kht blank wan ka mga sir

Anonymous said...

katulad din yan sa probs ko, nakaconnect siya sa 192.168.1.1 pro walang signal yung modem at di access ang gui using admin,,,walang wan address,lan lang meron at user/user lang ang puede at di mo ma-edit yun,,anybody can help pleaseee??????

Anonymous said...

Tama kau dun wala tlga.., kasi wala kang mac address na nakalagay sa modem mo..,

Anonymous said...

Mga sir pwede nyo po maaccess ung gui ng admin just type or copypaste this in your browser

192.168.1.1/html/login.cgi?Username=admin&Password - replace


I hope na makatulong to sainyo!

Anonymous said...

Mga sir hanggang ilang oras ba ung upgrade ng firmware ng bm625?help naman jan inapgrade ko kasi tapos bigla nalang nag blackout. Ano po ba ang mangyari sa modem ko?
Please i need answer........

Anonymous said...

para makapagupgrade ka ng firmware dapat nung time pa na di pa nabablank wan yung bm625 dapat pinalitan niyo na yung userlevel sa config ng userlevel 2 para sure na admin agad ang mapapasok mo or upgrade ka na agad ng libya di pa nabablankwan yung bm625 kasi sa libya firmware pwede ka ng magupgrade ng firmware kahit sa web gui ng user may option na rin na upload configuration file kahit user ka lang.. no need ng mag login ng admin pag libya firmware

Anonymous said...

oo tama pag libya na pwede ka ng magupgrade ng firmware mapa as user man or as admin kasi pareho nang may upload configuration file sa settings! at isa pa sa libya mapapalitan mo totally yung password ng admin sa config di tulad ng sa phil firmware kahit palitan mo pa yung password ng admin sa config bumabalik pa rin talaga sa default password. so pag libya na kahit blankwan na makakalogin ka parin sa admin gamit yung edited password sa config at di na rin gumagana sa libya yung password generator.

Anonymous said...

ay option pala ng upload firmware hindi choose configuration file.

Anonymous said...

tae yan na blank wan lalo ung akin tae tlga steady nlng ung ilaw ng wan ko...

Post a Comment